How to improve the service life of concrete mixer

• Follow the operating procedures of the mixer and do not overload it.

• Adjust the mixing speed and duration based on the specific materials being mixed to prevent undue wear.

• Ensure the correct proportion of concrete to avoid damage to the mixer caused by too hard or too thin concrete.

2. Regular cleaning:

• Clean the concrete residue on the mixing barrel and mixing blades in time after each use to prevent hardening and corrosion.
• Ensure regular cleaning of both the interior and exterior of the mixer to maintain equipment cleanliness.

3. Lubrication and maintenance:

• Check and add lubricating oil regularly to ensure that the bearings, gears and other moving parts of the mixer are well lubricated.
• When changing the lubricating oil, make sure to clean the old oil and use new oil that meets the specifications.
•  

4. Inspection and maintenance:

• Regularly check the various parts of the mixer, such as mixing blades, motors, reducers, chains, etc., and replace them in time if they are worn or damaged.
• Regular inspections and maintenance of the electrical components should be conducted by qualified professionals.

5. Material selection:

• Select mixing blades and mixing barrels constructed from wear-resistant materials to minimize wear.
• Use high-quality lubricating oil and grease to reduce wear and extend service life.

6. Operator training:

• Provide professional training for operators to ensure that they understand the correct operation and maintenance methods of concrete mixers.

7. Environmental control:

• Operate the mixer in a dry and well-ventilated environment to mitigate the impact of moisture and corrosive gases.
• For mixers used outdoors, rain and sun protection measures should be taken.
•  

8. Reasonable use arrangement:

• Ensure adequate rest periods to avoid continuous and uninterrupted use, thereby preventing overheating.
•