How to operate self loading mixer truck
2024-12-07
Preparation
1. Inspect the vehicle to ensure that all components, including the hydraulic system, mixing tank, control system, tires, and braking system, are functioning properly.
2. Understand the operating manual: Familiarize yourself with the vehicle's operating manual and understand all operating steps and safety regulations.
3. Wear safety equipment: Wear necessary personal protective equipment, such as hard hats, reflective vests, safety shoes, etc.
Operation steps
1. Start the truck:
Turn the ignition switch to the start position and start the engine.
Check the dashboard to ensure that all indicators are normal.
2. Loading:
Drive the vehicle under the hopper and open the feed port of the hopper.
Use the on-board control system to lift the hopper to the feed position and start loading.
Control the feed speed to avoid overflow.
3. Mixing:
Start the mixing function of the mixing tank while loading or after loading.
Adjust the mixing speed and time according to the requirements of the concrete.
4. Transport:
Close the hopper and drive the vehicle to the construction site.
During driving, maintain a steady speed and avoid sharp turns and sudden braking to prevent concrete segregation.
5. Unloading:
After arriving at the construction site, park the vehicle in the designated location.
Use the tilting function of the mixing tank to unload the concrete to the designated location.
The position and speed of unloading can be adjusted by controlling the rotation direction and speed of the mixing tank.
6. Cleaning:
After unloading, wash away the remaining concrete and dirt.
Rinse the mixing tank with clean water until it is clean.
Safety precautions
Follow all safety regulations and operating instructions.
Stay alert during operation and pay attention to the surrounding environment and people.
Make sure the vehicle is operating on stable ground to prevent rollover.
Before performing any maintenance or inspection, make sure the engine is turned off and all moving parts are stopped.
Do not overload and comply with the vehicle's load limit.
End of operation
Confirm that the vehicle is clean and there is no concrete left.
Check whether all parts of the vehicle are normal and record any matters that need repair or attention.
Park the vehicle in the designated location and prepare it for next use.
---%E5%89%AF%E6%9C%AC.png)
